Pole mounted transformers are mounted on an electrical service pole, usually at the level of the overhead cable

Pole mounted transformers are used in extensive rural area. These transformers range from 16 kVA to 100kVA and transform 11,000 to 33,000 volts down to a low voltage of 400 volts. Pole mounted transformers are reasonably small in size and mass so that it is easy to install them on single pole structures, and larger units on two-pole structures, approximately 5 meters above the ground.This makes the transformers inaccessible, reducing the risk of injury to animals and people and minimizing vandalism.

Description：

Our Tank are built tough to meet the most demanding require-ments and are the finest offered in the industry. Start-ing with hot rolled steel, the tanks are MIG welded and possible leaks are tested using water immersion. The metal is prepared by shot blasting and passes through a 7 stage cleaning and zinc phosphate bath.

A polyes-ter powders coating is electro-statistically sprayed, drying to a 3 mil-minimum film build.

The finished tanks has been tested and has passed all tests outlined in the EEI Finishing Guidelines including 160in-Ibs impact and 1500 hour salt spray.

For severe corrosion environments tanks are offered in 300 series stainless steel for maximum protection.

All pole tanks feature hanger brackets, lift ears, and threatens pads which are welded all around adding strength and reducing the possibility of rusting. It also allows sling lifting while the unit is still banded to the pallet.

To 500 KVA

To 34.5 kV

Single-phase and three-phase

Two-bushing designs

Single-bushing designs

Conventional designs

CSP designs

Pole mounted

Platform mounted

Mineral oil

High fire point fluid

Our Advantage

* Good strength

* Good insulating properties

* Lightning-withstand

* Anti-corrosion

* Rustproof