Three-phase Pad-mounted Transformer Tank_Oil-immersed Transformer Tank_Transformer Tank_Products_Hangzhou Giantway Import & Export Co., Ltd.

If you are interested in our products or need technical supports and service,please contact us as bellowing:

Details

The transformer tank is the enclosures of the transformer, in which the transformer core and transformer winding are installed and filled with transformer oil. The transformer tank is usually equipped with the radiator. The transformer tank can protect the Internal parts and dissipate heat.

As for Three-phase Pad-mounted transformer tanks,it can put the transformer winding, core, high voltage load switch and fuse in the PAD mount tank.

Material:

SS400(Iron),SS304,SS304L,It can be made according to customer requirements.

Advantage:

1.The oil tank is made of 2.5 thick material, and the lid is made of 2.0 thick material. All materials are made of Q235 cold plate. The film thickness is 80-120um in general and 160um in special requirements

2.Surface line spraying

3.Altitude: not more than 1000 meters;

4.Ambient temperature: no higher than +40°C, no lower than -25°C, daily average temperature difference no more than 35°C, annual average temperature difference no more than 20°C;

5.The wind speed does not exceed 35m/s; There is no explosion hazard in the installation site, no chemical corrosion and severe vibration;

6.Cooling method: natural air cooling (AN).

Three-phase Pad-mounted transformer tank processing technology

1.using manipulator welding technology

2.punching type leakage detection method

3.surface treatment, anti-corrosion anti-radiation primer + flour